Quadra-Fire CUMPGAP-PMH H. Typical Stove Systems, Cumberland Gap Wood Stove, 1 Masonry Chimney

R

Cumberland Gap Wood Stove

H. Typical Stove Systems

Stove system with masonry chimney consists of: Figure 8.1

•Stove

•Chimney Connector (stove pipe)

•Thimble

•Masonry Chimney

•Hearth Pad Floor Protection

Stove system with prefabricated metal chimney consists of: Figures 8.2 and 8.3

•Stove

•Chimney Connector (stove pipe)

•Thimble (for exterior chimney)

•Firestops

•Insulations Shields

•Storm Collar and Flashing

•Termination Cap

Spark Arrestor Cap
Concrete Cap	Fireclay Flue Liner
	With Air Space

	Rafter
	Flashing
1 in (25mm) Clearance
With Firestop
Ceiling Joist	Eave
Combustible Wall
Thimble,
12 in (305mm)
Of Brick	Sheathing
	Outside Air Rear Vent
Floor	Outside Air
	Termination Cap
Protector
	Airtight
	Cleanout Door

• Hearth Pad Floor Protec-	Figure 8.1 Masonry Chimney
tion

			Combustible Outside Wall
		Listed	2" (51mm)
		Chimney Pipe
			Clearance
		Chimney
			Listed Chimney
		Connector
	Listed Cap
Maintain 2" (51mm)		To Stove	Insulated "T"
Clearance Through Eave
			Wall Support
		Trim Collar	Wall Spacer on
		on Inside
		Wall	Outside Wall
Flashing
Combustible	*
Ceiling		Insulated "T"
Chimney
Connector
	*
	*	Combustible Wall
Floor
Protector		*Refer to Clearances to Combustibles

Figure 8.2 Exterior Prefabricated Chimney

				Listed
	Listed Cap			Chimney	Attic
Maintain 2" (51mm)					Insulation
				Combustible
					Shield
Clearance		Storm Collar
				Ceiling
					Specified
				Joists
		Flashing			Clearance
				Chimney	Ceiling
					Support
				Connector
Listed Chimney
				To Stove
Ceiling Support				Combustible Wall
Chimney	*
Connector
			*Refer to Clearances
	*			to Combustibles
Floor
Protector

Figure 8.3 Interior Prefabricated Chimney

Page 8 7006-188G November 5, 2010