Mt. Vernon Pellet Insert (AE)
E. Surround and Trim Set - Cast
Included in Surround Kit: (2) side panels, left and right; (1) panel top; (1) fastener package.
Included in Cast Trim Kit: (2) cast trim legs, left and right; (1) cast trim header; (2) cast trim footers, left and right; (1) fastener package.
Tools Needed: Powered Phillips head screw driver
1.Remove contents from box being careful not to scratch or damage the cast trim pieces.
2.Lay the surround set face down on protective covering to prevent scratching the painted surface.
3.Secure the surround legs to top panel with the screws provided.
4.Now bend the tabs down toward the backside of the panel set, 5 on top and 2 on each leg. Leave the panel set face down. Figure 22.1.
5.Place the corresponding cast trim pieces ( 2 cast trim legs and 1 cast trim header) underneath the panel set, also face down.
6.Place washer provided over tab and secure the trim and panel together with screw. Continue for all tabs.
7.Secure cast footers with screws.
8.Remove both left and right cast sides from insert. See Figure
21.4page 21.
9.Carefully slide surround and trim over the top of the insert into place matching the mounting holes on the panel with the mounting holes on the insert. Secure with screws provided. Figure 22.5.
2. Bend tabs down | 1. Screw panels | |
together | ||
| ||
1. Screw panels |
| |
together |
| |
| 2. Bend tabs | |
| down | |
3. Install Cast Trim Header |
|
Figure 22.1
R
F. Surround & Trim Set, Basic
Included in Surround & Trim Kit: (2) corner brackets and set screws; (1) trim set, 3 piece; (2) side panels; (1) top panel;
(4) screws.
Tools Needed: Powered Phillips head screw driver
1.Secure the top panel to the surround sides with the screws provided. Figure 22.3.
2.Assemble the trim with the (2) corner brackets provided. Figure 22.4.
3.Remove the 2 cast sides and slide the assembled trim over the assembled surround set. See Figure 21.4 on page 21.
4.Carefully slide surround and trim over the top of the insert into place matching the mounting holes on the panel with the mounting holes on the insert. Secure with screws provided. Figure 22.5.
Back of Top Panel |
Screws |
Back of Side Panel |
Figure 22.3
Figure 22.4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Shown with trim installed on panel set | |||||||||||||||
| Figure 22.2- Completed View |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Figure 22.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Page 22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| November 22, 2011 | ||||
