Mt. Vernon Pellet Insert (AE)
B. Clearance To Combustibles, UL and ULC
A | C | D |
| ||
C | B | B |
|
| |
|
| E |
| 0 inch Clearance To Exposed Section And Face Trim | |
Figure 8.1
| Location | Confi guration | Inches | Millimeters |
|
|
|
|
|
A | Top of Hopper | Top or Rent Vent | 3 | 76 |
|
|
|
|
|
B | Side of Outside Skin | Top or Rear Vent | 2 | 51 |
|
|
|
|
|
C | Back of Hopper | Top Vent | 191 | |
|
|
|
|
|
|
| Rear Vent | 70 | |
|
|
|
|
|
D | Vent Pipe to Combustible | Top or Rear Vent | 3 | 76 |
|
|
|
|
|
E | Cast Side to Side Wall | Top or Rear Vent | 6 | 152 |
|
|
|
|
|
R
Built-in Unit - Rear Vent with Outside Air
| 6 in |
Top/Rear Vent | (152mm) |
3 in. (76mm) |
|
Back of Hopper |
|
2.75 in. (70mm) |
|
| Outside Air |
WARNING
Fire Risk.
Comply with all minimum clearances to combustibles as specifi ed.
Failure to comply may cause house fi re.
NOTE:
•Illustrations refl ect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
Figure 8.2
Page 8 | November 22, 2011 |
