Quantum L100, L25 - page 109

Chapter 5 Running Diagnostic Programs
Running the Move Location Test
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 93
the selected number of test cycles. The home location depends on
whether the destination is a tape drive or a magazine slot:
• If the destination is a tape drive, the home location is slot 1 of
the level 1 left magazine.
• If the destination is a magazine slot, the home location is tape
drive 1.
To ru n th e Move Location test:
1Access the Diagnostics Menu screen (see Accessing the
Diagnostics Menu Screen on page85).
2Press the Up and Down buttons to select General.
3Press Select.
The GUI displays the Diags: General screen (see figure 48 on
page 87).
4Press the Up or Down buttons to select Move Location.
5Press Select.
The GUI displays the Diag: Move-Location screen (see
figure 54).
Figure 54 Diag:
Move-Location Screen