Chapter 3 Changing the Library Configuration
Setting the Library ID
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 55
Setting the Library ID 3
By default the library SCSI ID is set to 0. To change the library SCSI
ID setting:
1Access the Configuration screen (see Accessing the
Configuration Screen).
2Press the Up or Down buttons until Library ID is highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired SCSI ID.
Available settings are 0 through 15.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.