Chapter 3 Changing the Library Configuration
Changing the Terminator Power Setting
58 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Terminator Power Setting 3
The Termi nato r Pow er option controls whether the library robotics
provide terminator power.
To enable or disable robotics terminator power:
1Access the Configuration screen (see Accessing the
Configuration Screen).
2Press the Up or Down buttons until Termi nato r Pow er is
highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Termina tor
Power setting. Available settings are Enabled and Disabled.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Note: The default setting is Enabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.