Chapter 2 Basic Operations
Removing the Magazines
42 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
2Press the button corresponding to the magazine access door
you want to open:
To release the top left magazine access door, press 1.
To release both left magazine access doors, press 1&2.
To release the right magazine access door, press 3.
To release all the magazine access doors, press All.
3Press the white button next to the desired magazine access
door and open the door.
4Grasp the handle at the front of the desired magazine and pull
it forward and out of the library.
5When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine
access door.
6On the Release Magazines screen, press Re-Lock.
The library locks the magazine access doors and inventories
the magazines. When the inventory is complete, the GUI
displays the main screen.
Removing a Magazine when the L100 Library is PoweredDown 2
To remove a magazine when the library is powered down:
1Look through the viewing window and verify that all
cartridges are fully seated either in a magazine slot or in the
robotic hand.
Note: If you are opening the bottom left magazine access
door, open the top left magazine access door first.
Caution: You can damage the library severely if you try to
remove a magazine when one of the data
cartridges is not fully seated.