
Chapter 2 Basic Operations
Using the Mailbox
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 37
Configuring the
Mailbox 2
By default, the Import/Export option is set to MAP. To change this
setting:
1On the main screen, press Mailbox.
The GUI displays the Mailbox screen (see figure22 ).
2On the Mailbox screen, press Config.
The GUI displays the Configuration screen, with the Import/
Export option highlighted.
3Use the Up and Down buttons to select the desired Import/
Export setting. The available settings are None, 1-Slot,
10-Slot (or 12-Slot in LTO libraries), and MAP.
4Press Select.
5Press Main to return to the main screen.
Note: The default setting is MAP.
For more information about these settings, see
Changing the Import/Export Setting on page 69.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.