Chapter 3 Changing the Library Configuration
Changing the Short Labels Setting
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 63
Changing the Short Labels Setting 3
The Short Labels option controls how many bar code label
characters are returned when the host issues a Read Element
Status command. When Short Labels is set to:
•Off, all of the bar code label characters are returned
•On, only the first six characters of the bar code label are
returned
To enable or disable Short Labels:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Short Labels is highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Short Labels
setting. The available settings are Enabled and Disabled.
5Press Select.
6To return to the Configuration screen without changing the
option setting, press Cancel.
7Press Main to return to the main screen.
Note: The default setting is Disabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.