
Chapter 3 Changing the Library Configuration
Changing the Serialization Setting
62 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Serialization Setting 3
The Serialization option controls how the library returns the tape
drive serial number when a Read Element Status is requested.
When Serialization is set to On, the tape drive serial number is
returned in a format compatible with Quantum ATL Prism
products. When Serialization is set to Off, the tape drive serial
number is returned in a vendor unique format. This setting is only
valid when Emulation is set to ATL M2500 or ATL 1500 (see
Changing the Emulation Setting on page 59).
To enable or disable drive serialization:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Serialization is highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Serialization
setting. The available settings are Enabled and Disabled.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Note: The default setting is Disabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.