Chapter 3 Changing the Library Configuration
Changing the Import/Export Setting
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 71
To se lec t t he Import/Export setting:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Import/Export is
highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Import/Export
setting. The available settings are None, 1-Slot, 10-Slot (or
12-Slot in LTO libraries), and MAP.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Caution: Changing this setting may cause the host(s) to fail to
recognize the library. If you change this setting, be
aware that you will have to reconfigure your backup
software for the new library configuration.
Note: The default setting is MAP.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.