Quantum L100, L25 Changing the Auto-Clean Setting

Chapter 3 Changing the Library Configuration
Changing the Auto-Clean Setting
72 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Auto-Clean Setting 3
To enable or disable Auto-Clean:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Auto-Clean is highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Auto-Clean
setting. The available settings are Enabled or Disabled.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Note: The default setting is Disabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.