Chapter 6 Running the Demonstration Programs
Running the Demo 3 Program
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide 101
Running the Demo 3 Program 6
The Demo 3 program causes the robot to pick a cartridge from a
randomly selected occupied magazine slot and place it back in the
same slot. The robot then moves to another randomly selected
occupied slot and repeats the process.
To ru n th e Demo 3 program:
1Verify that at least one magazine is installed in the library and
that at least one cartridge is present.
2Access the Demo Programs screen (see Accessing the Demo
Programs Screen).
3Press the Up or Down buttons to select Demo 3.
4Press Select.
The Demo 3 program starts. This program continues until you
press the Stop button.
5If desired, include the drives or the fixed slot in the test:
aPress the Level button to select the level where the desired
drive or fixed slot is located.
bPress Drive 1 or Drive 2 to include a drive.
cPress Fixed to include the fixed slot.
6To stop the program, press Stop.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
7Press Back to return to the Demo Programs screen.