Quantum L100, L25 Setting the Date

Chapter 3 Changing the Library Configuration
Setting the Date
68 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
The hour setting is highlighted.
4Use the Up or Down buttons to select the correct hour sett ing.
5Press Select.
The minute setting is highlighted.
6Use the Up or Down buttons to select the correct minute setting.
7Press Select.
The seconds setting is highlighted.
8Use the Up or Down buttons to select the correct seconds
setting.
9Press Select.
10 Press Main to return to the main screen.
Setting the Date 3
To set the date:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Date is highlighted.
3Press Select.
The day setting is highlighted.
4Use the Up or Down buttons to select the correct day of the
month.
5Press Select.
The month setting is highlighted.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.