Quantum L100, L25 Changing the Sync Negotiation Setting

Chapter 3 Changing the Library Configuration
Changing the Sync Negotiation Setting
60 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Sync Negotiation Setting 3
The Sync Negotiation option controls whether the library robotics
negotiates synchronous data transfer mode. Normally, this
negotiation is performed by the host.
To enable or disable Sync Negotiation:
1Access the Configuration screen (see Accessing the
Configuration Screen on page53).
2Press the Up or Down buttons until Sync Negotiation is
highlighted.
3Press Select.
4Use the Up or Down buttons to select the desired Sync
Negotiation setting. The available settings are Enabled and
Disabled.
5Press Select.
To return to the Configuration screen without changing the
option setting, press Cancel.
6Press Main to return to the main screen.
Note: This option does not enable or disable synchronous data
transfers; it only controls the ability of the library to
negotiate for such transfers.
Note: The default setting is Enabled.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.