Regency B36X Installation, Important Finishing Detail Note, Full Screen Doors Only, Diagram

INSTALLATION

FINISHING

IMPORTANT FINISHING DETAIL NOTE:

Before placing unit into final position - it is important to know the total thickness / height of finished hearth (tile, carpet, etc.) The base of the fireplace should be level or higher than the finished hearth height.

Important:

Finishing materials such as tile, river rock, etc, must not protrude beyond the front facing flanges the sides and top of the firebox opening.

Full Screen Doors Only:

If finishing with any material thicker than 1-1/4" - a 3/4" gap must be maintained between the full screen doors and the finishing material.

This gap is necessary to facilitate the installation and removal of the full screen doors.

Diagram 1

Note: All facing material should butt up cleanly to the flanges around the firebox opening.

Rough edges will be visible from the front view with the flush louvers or flush panels - if not using the finishing trim.

To maintain a clean finished edge - it is recommended to install the drywall or other facing material with the finished edge against the fireplace / nailing strips.

Alternatively, you can use J Style Trim or Metal Corner Bead to cover cut edges of the facing material.

Diagram 3

Full Screen

Door

3/4"

Finishing material - thicker

than 1-1/4"

			Diagram 4
Diagram 2	1"
		Note: There is a 1" air space between the unit and full screen door
		which must not be covered.

12 Regency Bellavista™ B36X Gas Fireplace