Regency B36X Installation, Vertical Termination With Co-Linearflex System, Required Parts

INSTALLATION

VERTICAL TERMINATION

WITH CO-LINEAR FLEX SYSTEM

THE APPLIANCE MUST NOT BE CONNECTED TO A CHIMNEY FLUE SERVING A SEPARATE SOLID FUEL BURNING APPLIANCE.

This appliance is designed to be attached to two 3" (76mm) co-linear aluminium flex running the full length of the chimney. See the Venting Arrangements on next page for minimum and maximum heights.

Required Parts:

Part # Description

946-529 Co-linear DV Vertical Termination Cap

948-305 3" Flex - 35 ft.

946-563 Co-Axial to Co-Linear Adapter Kit which contains the following: Co-linear Flex Adapter

Outer Pipe

Inner Pipe Adapter 770-994 Rigid Pipe Adaptor 946-606 Vent Reducer

Alternate Approved Caps

46dva-VC	Vertical Termination Cap
46dva-VCH High Wind Cap
46dva-GK	3" Co-linear Adapter with flashing

Masonry chimneys may take various contours which the flexible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.

The Air Intake pipe must be attached to the inlet air collar of the termination cap.

Co-linear DV

Vertical Termination

Cap # 946-529

Amaximum of two certified

joiner kits
may be used
per length.	Flex Liner
#948-305 (35 ft)

Exhaust

Flue

NOTE:

See detailed venting arrangements, vertical terminations, co-linear flex system into masonary fireplaces in this manual.

Outer
Pipe
with Kit#
946-563
Pipe Length
Reducer #946-606
(4 x 6-5/8 venting)
Rigid Pipe Adapter	90 Degree
# 770-994
	Elbow

Air Intake

Co-Linear

Flex

Adapter with Kit# 946-563

Inner Pipe

Adapter with Kit# 946-563

30 Regency Bellavista™ B36X Gas Fireplace