INSTALLATION
DC SPARKER INSTALLATION
Installation of the DC Sparker:
23)Locate the Piezo Ignitor situated at the right side of the valve assembly.
Piezo
Ignitor
24)Remove the Piezo Ignitor wire from the back of the Piezo Ignitor.
Ignitor
Wire
Piezo
Ignitor
25)Connect the ignitor wire from the Piezo to the DC sparker.
DC
Sparker
Ignitor
Wire
27)Plug the DC spark generator wires to the DC Sparker.
28)Remove the battery cover from the DC Sparker and install 1 - 'AA' battery in the DC Sparker and then install the DC Sparker to the floor of the unit, left of the valve assembly, with two Phillips screws.
DC Sparker Battery Replacement
1)Remove the battery cover from the DC Sparker - remove the AA battery.
26)Connect the DC spark generator wires to the SIT Valve. Secure with a phillips head screw as shown below.
2) Replace with a new 'AA' battery and reinstall battery cover.
DC Sparker
Generator Wires
Regency Bellavista™ B36X Gas Fireplace | 41 |