Regency B36X Log Set Installation, logs can interfere with pilot operation, Vermiculite

INSTALLATION

LOG SET INSTALLATION

Installation of Brick Panels must be completed before installing the log set.

Read the instructions below carefully and refer to the images. If the 2) Spread vermiculite along the base of the firebox. logs are broken do not use the unit until they are replaced. Broken

logs can interfere with pilot operation.

Improper positioning of the logs may create carbon build-up and can alter the unit's performance which is not covered under warranty.

Log Kit #556-930 contains the following pieces:

ARear Log

BFront Bottom Log

CCenter Right Log

DCenter Left Log

EMiddle Left Log

FFront Left Log

902-156	Lava Rocks
902-179	Vermiculite
946-669	Platinum Embers
	(supplied w/packaged manual)

Vermiculite

3)Place Log A on the rear log support pins with the flat side to the back.

EA

A

4) Place Log B on the front right side of the burner. Push the back of the log against the 2 brackets with the notch on the bottom right side of the log fitting into the right side of the grate.

F
D	B	C
1) Carefully remove the logs from the packaging and unwrap them. The
			B
logs are fragile, handle with care - do not force into position.

Notch

Regency Bellavista™ B36X Gas Fireplace 45