Regency B36X Black Enamel Panel Installation, Final Installation, Heat defl ector

INSTALLATION

4)Remove 1 screw (see inset A), position right side panel in firebox - position panel clip in place and secure with 1 screw (see inset B).

Tighten the screw.

Location of hex

head screw

4"

2)Install the back panel first - use care when clearing the burner assembly and rear log tray, so panel is not scratched.

A

22"

B

Diagram 6

5)Repeat step 4 for left side panel.

6)Reverse step 1.

Diagram 3

3)Install the top panel next - slide the panel in over top of the back panel - orient the panel so the fold in the metal faces in (see inset A).

Fold

A

Diagram 4

4)Remove 1 screw (see inset A), position right side panel in firebox - position panel clip in place and secure with 1 screw (see inset B). Tighten the screw.

Final Installation Diagram 7

BLACK ENAMEL PANEL INSTALLATION

	TOP
RIGHT	BACK	LEFT

Diagram 1

1)Remove the heat deflector by removing the 2 screws securing the heat deflector to the top of the firebox (see Diagram 2).

A

B

Diagram 5

5)Repeat step 4 for left side panel.

6)Reverse step 1.

Heat defl ector Diagram 2 Final Installation Diagram 6

44 Regency Bellavista™ B36X Gas Fireplace