Regency P33-NG3 Rigid Pipe Venting Systems, Horizontal or Vertical Terminations, nation Caps

INSTALLATION

RIGID PIPE VENTING SYSTEMS

Horizontal or Vertical Terminations

The minimum components required for a basic horizontal termination are:

1AstroCap Horizontal Termination Cap

145o Elbow

1Rigid Pipe Adaptor

1Wall Thimble

1Length of pipe to suit wall thickness (see chart)

Vertical

Terminal

Storm Collar

Vinyl Siding

Standoff (Optional)

Flashing

For siding other than vinyl furring strips may be

used, instead of the vinyl siding standoff, to create Ceiling Firestop a level surface to mount the vent terminal. The

Terminal must not be recessed into siding.

Horizontal

Termination

Cap

If a Vinyl Siding Standoff is required (it must be		Wall Thimble
used with vinyl siding), measure to outside surface	Pipe Length	Adj.Pipe Length
of wall without siding and add 2 inches.		11" - 14-5/8"
	(279mm - 372mm)		Horizontal
	90o Elbow		Termination Cap
Alternate Hori-	24" (610mm)
zontal Termi-
	Pipe Length	Vinyl Siding
nation Caps
		Standoff (Optional)
		Wall Thimble
	Adj.Pipe Length
	11" - 14-5/8"
	45o Elbow (279mm - 372mm)
	Rigid Pipe Adaptor
		WARNING:
		Do not combine venting components from
		different venting systems.

However use of the the AstroCapTM and FPI

Riser is acceptable with all systems.

					This product has been evaluated by Intertek for
					using a Dura-Vent Flue Adaptor in conjunction
		Flat Wall Installation			with Selkirk Direct-Temp and Ameri Vent Direct
Max. Wall			Vent Length		venting systems. Use of these systems with the
					Direct Vent GS starting collar is deemed accept-
Thickness (inches)			Required (inches)
					able and does not affect the Intertek WHI listing
			7-1/4"	6"
					of components.
		10-1/4"	9"
		13-1/4"	12"		When using piping other than Simpson
12-1/4"	-	15-7/8"	11" - 14-5/8" Adj. Pipe		Dura-Vent, 3 screws must be used to
18-1/4"	-	25-1/4"	11" - 14-5/8" Adj. Pipe		secure rigid pipe to adaptor.

The FPI AstroCapTM and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS, American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPITM, and FPI AstroCapTM are the proprietary trademarks of FPI Fireplace Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

Regency P33-3 Zero Clearance Direct Vent Gas Fireplace