Memory Transmission

A Make sure that Memory TX is se- lected.B Place the original.

Note

❒The original can be placed ei- ther in the ADF or on the expo- sure glass, until the {Start} key is pressed.

Reference

p.11 “Placing Originals”

C Make the settings you require.

Reference

p.28 “Scan Settings”

p.29 “Original Type”

p.30 “Image Density (Con- trast)”

D Specify a destination.

Note

❒If you make a mistake, press the {Clear/Stop} key, and then enter the correct number.

Reference

p.33 “Entering a Fax Number”

p.35 “Entering an E-mail Ad-

 

2

dress”

 

p.35 “Entering an IP-Fax Destination ”

p.38 “Using Destination Lists”

p.47 “Chain Dial”, Facsimile Reference <Advanced Features>

p.47 “Redial”, Facsimile Reference <Advanced Features>

E When sending the same original to several destinations (broad- casting), press [Add] to specify the destinations.

Note

❒You do not have to press [Add] when adding a destination us- ing the destination list.

❒If you do not want to do a broad- cast transmission, proceed to step G.

17