Faxing

A

2

Press

to switch the destina-

Reference

tion to IP-Fax destination.

“Entering Text”, General Set-

 

 

tings Guide

 

 

 

 

The destination is specified.

 

 

 

B Press [Manual Input].

Note

❒You can manually enter the des- tination using the ten keys.

C Enter the IP-Fax destination and then press [OK].

Note

❒If you have set both of “Enable H.323” and “Enable SIP” pa- rameters to “On” with “IP-Fax Settings” under “Facsimile Fea- tures”, [Protocol] appears. Press this button to select a protocol to be used.

❒If you enter an incorrect charac- ter, press [Backspace], or [Delete All]. Then, re-enter the character correctly.

❒To change the IP-Fax destina- tion after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK].

Note

❒Press [ProgDest] in this order to store the entered IP-Fax destina- tion in the Address Book. See p.37 “Registering Entered Des- tinations to the Address Book”.

-IP-Fax Destination

Depending on the network to which this machine is connected or this ma- chine's configuration, enter the IP-Fax destination as follows:

❖When not using a gatekeeper/SIP server

•From IP-Fax to IP-Fax

Specify the IP address or host name of the receiving machine. Example: IP address: 192.168. 1.10

Example: Host name: tokyo. abc.co.jp

•From IP-Fax to G3 fax

Specify the G3 fax telephone number of the receiving ma- chine.

Example :0312345678

36