Ricoh Caplio RX operation manual Formatting Internal Memory in Format

Formatting Internal Memory (IN FORMAT)

If an error message "Format the internal memory" is displayed, it will be necessary to format the internal memory prior to use.

Formatting the internal memory erases all of the images recorded in the memory. If you have images that you do not want to erase stored on the internal memory, please con- tact the Ricoh Service offices prior to format- ting it.

To format an SD Memory card, follow the steps below.

1. Turn the Mode Dial to 1 (Setup Mode).

The Setup Screen appears.

2. Select [IN FORMAT] and then press the O button.

A screen appears to confirm formatting.

3. Press the $ button to select [YES] and press the O button.

Formatting starts. When it finishes, the SETUP screen returns.

Adjusting the Bright- ness of the LCD Monitor

(LCD BRIGHTNESS)

To adjust the brightness of the LCD Monitor, follow the steps below.

1. Turn the Mode Dial to 1 (Setup Mode).

The Setup Screen appears.

2. Press the " button to select

[LCD BRIGHTNESS].

7

3. Press the O button.

The LCD Brightness Adjustment bar appears.

4. Press the !" buttons to adjust the brightness.

Moving it to the side makes it darker. Moving it to the side makes it brighter.

The brightness of the screen behind the bar changes as you alter the setting.

5. When you attain the desired brightness, press the O button.

The SETUP screen returns.

This setting will be used until you change it.

105