Ricoh Caplio RX Press the button to select Copy to Card Press the O button, Movie, or sound

6. Press the !"#$ buttons to select the still image, movie, or sound you wish to protect and press the O button.

	The Protect symbol appears in the
6	upper-right corner of the first still image,
	movie, or sound.

7. Repeat Step 6 to select all the still images, movies, and sounds you wish to protect.

If you selected an image by mistake, you can deselect by selecting the image and pressing the O button again.

8. Press the M button.

A message appears indicating that the images are being protected. When pro- tection is complete, the display returns to the Thumbnail Display screen.

To remove protection from multiple still images, movies, or sounds, follow the same steps described above to select them and remove protection.

For details on thumbnail display, see P.83.

Copying the Contents of Internal Memory to a Mem- ory Card (COPY TO CARD)

You can copy all the movie, still image, and sound data stored in internal memory onto an SD Memory Card at once.

To copy still images, movies, and sounds from internal memory to SD Memory Card, follow the steps below.

1. Turn your camera off by press- ing the power button.

2. Insert the SD Memory Card.

3. Turn the camera on.

4. Turn the Mode Dial to 6 (Play- back Mode).

5. Press the M button.

The Playback menu appears.

6. Press the " button to select [COPY TO CARD].

7. Press the O button.

The display indicates copying is in progress; once finished, the playback screen returns.

•If the capacity of the SD Memory Card you are copying to is insufficient, a message will be dis- played indicating there is not enough capacity. To copy only the number of shots that will fit into the available capacity, select [YES] and then press the O button. To cancel copying, select [NO] and then press the [OK] button.

•It is not possible to copy from a Memory Card to internal memory.

For how to load an SD memory card, see P.17.

98