Ricoh Caplio RX operation manual Removing the AC Adapter

4. Open the power (DC input) cable

cover and take the cable out.

5. Close the battery/card cover and slide it back into place.

6. Plug the power cord into an out- let.

•Be sure to firmly attach cables and plug in cords.

•When you are not using the camera, unplug the AC Adapter from the camera and the power outlet.

•While in use, if you detach the AC Adapter or unplug it from the outlet, data may be lost.

If you have already used this camera, make sure it is turned off before removing the AC Adapter Battery.

Removing the AC Adapter

When using the AC Adapter, the battery level indication may not reach the full area.

1. Make sure the camera's power is off.

2. Unplug the power plug from the 1 outlet.

3. Open the battery/card cover.

The cover slides open in two steps.

First slide the cover toward the face of the camera, then lift it to expose the bat- tery compartment.

4. Remove the battery.

5. Close the battery/card cover and slide it back into place.

15