Ricoh Caplio RX Connecting the Camera to a Computer, Off, Connect the USB cable to

Connecting the Camera to a Computer

After installing the software on your com- puter, connect your camera to it.

	1.	Make sure the camera's power is
2		off.
	2.	Connect the USB cable to the

USB port of your computer.

3. Connect the USB cable to the USB terminal of your camera.

For Windows XP

In Windows XP, the first time you connect your camera to the computer using a USB cable, the [Found New Hardware Wizard] screen will appear.

1. Select [Install from a list or spe- cific location (Advanced)].

2. Select [Next].

3. Select [Search for the best driver in these locations.] - [Include this location in the search] and then press the [Browse] button.

Your camera turns on.

4. Browse to the folder where the WIA driver was installed (by default this should be C:\Pro- gram Files\CaplioSoftware\WIA driver) and then select [Next].

The WIA Driver is installed.

The[Caplio RX] screen appears.

124