Ricoh Caplio RX operation manual To disconnect your camera from your com- puter

Connecting the Camera to a Computer

After installing the software on your com- puter, connect your camera to it.

	1.	Make sure the camera's power is
2		off.
	2.	Connect the USB cable to the

USB port of your computer.

3. Open the terminal cover, and then connect the USB cable to its USB terminal.

Your camera turns on.

•To disconnect your camera from your com- puter:

1.Turn your camera off by pressing the power button.

2.Unplug the USB cable.

•When you are downloading images from your camera, the AC Adapter (sold sepa- rately) is recommended.

Downloading Pictures to Your Computer

After you have connected your camera to the computer, images download automatically.

Images are downloaded to your computer from the following memory sources.

When no memory card is	When an SD Memory Card
loaded	is loaded
Downloads from internal	Downloads from SD Mem-
memory	ory Card

For how to change files names when record- ing, see P.109.

Downloading methods differ (as described in the following table) depending on the envi- ronment used. Follow the steps in the refer- ence pages to download.

For Mac OS 8.6 to	Download using RICOH	see P.155
9.2.2	Gate La.
For Mac OS X 10.1.2	Download using the	see P.156
to 10.3	Mounter.

154