Ricoh Caplio RX operation manual For Windows XP

16.Turn off your camera and computer.

17.Turn your computer back on and reinstall the software from the CD-ROM. *At this time, do not connect your camera.

18.Connect your camera via the USB cable to your computer. When the computer recognizes the camera, the [New Hardware] screen launches and your camera is registered by the com- puter.

Step 2If your computer still does not recognize the camera, follow the steps below.

1.Load the Caplio CD-ROM into your computer.

2.Connect your camera via the USB cable to your computer.

3.Click the [Start] button on the Windows taskbar to display the [Start] menu.

4.On the [Start] menu, point to [Settings], and then click [Control Panel].

5.On the Control Panel displayed, double-click the [System] icon.

6.On the [System Properties] screen displayed, double-click the [Hardware] tab.

7.On the [Hardware] tab page displayed, click the [Device Manager] button.

8.On the [Device Manager] page displayed, click [+] on the left side of [Port COM/LPT] to open.

9.Check whether or not there is an unknown device symbol (!) indicated for [Ricoh Camera Port]. If there is, select it, and then click the [Delete] button at the bottom of the [Device Man- ager] tab to delete it.

10.Click [OK] to close the [System Properties] screen.

11.When the display returns to the Control Panel, double-click the [Add/Remove Applications] icon.

12.On the [Add/Remove Applications Properties] screen displayed, select [Caplio Software], and then click the [Add/Remove] button. This uninstalls the Caplio Software.

13.Click [OK] to close the [Add/Remove Applications Properties] screen. 14.Click the [x] (Close) button to close the Control Panel.

15.Turn off your camera and computer.

16.Turn your computer back on and reinstall the software from the CD-ROM. *At this time, do not connect your camera.

17.Connect your camera via the USB cable to your computer. When the computer recognizes the camera, the [New Hardware] screen launches and your camera is registered by the com- puter.

•For Windows XP

Step 1First, follow the steps below.

1.Load the Caplio CD-ROM into your computer.

2.Connect your camera via the USB cable to your computer.

3.Click the [Start] button on the Windows taskbar to display the [Start] menu.

4.On the [Start] menu, click [Control Panel].

5.On the Control Panel displayed, click [Switch to Classic Display]. The display changes its appearance and the [System] icon appears.

171