Changing the Edge Quality of Still Images

(SHARPNESS)

You can change the definition of your still images to either sharp or soft.

3

By default, your camera is set to Normal.

 

To make changes to the sharpness of still images, follow the steps below.

1. Turn the Mode Dial to 5 (Shoot- ing Mode).

2. Press the M button.

The Shooting menu appears.

3. Press the #$ buttons to switch between displays as required.

4. Select [SHARPNESS] and then press the O or $ button.

5. Press the !" buttons to select the desired setting.

6. Press the O or # button.

Sharpness settings are complete.

7. Press the M button.

The Shooting Menu closes and the set- ting value is displayed on the right of the screen.

This setting will be used for shooting until you change it.

70

Page 70
Image 70
Ricoh Caplio RX operation manual Changing the Edge Quality of Still Images, Sharpness settings are complete