3. Make sure the card is facing the right way and then push the card all the way in until it clicks.

3. Press the card gently and release it.

The card pops out just a little.

1

4. Close the battery/card cover and slide it back into place.

When loading the SD Memory Card, take care not to get any dirt on the card's metal parts.

Removing the SD Memory Card

1. Make sure the camera's power is off.

2. The cover slides open in two steps.

First slide the cover toward the face of the camera, then lift it to expose the bat-

tery compartment.

4. Gently take the card out of the camera.

5. Close the battery/card cover and slide it back into place.

18

Page 18
Image 18
Ricoh Caplio RX Press the card gently and release it, Removing the SD Memory Card, Card pops out just a little