Ricoh Caplio RX operation manual Shooting a Still Image with Sound Image with Sound

between displays as required.

Shooting a Still Image with Sound (IMAGE WITH SOUND)

You can shoot a still image with a voice memo. After the still image is stored, voice recording starts automatically and can con- tinue for up to eight seconds. This function is useful for adding comments on the status or

3 contents of subject. Even when shooting in Scene Mode, you can record a voice memo by displaying and setting the Shooting menu.

To shoot an image with sound, follow the steps below.

1. Turn the Mode Dial to 5 (Shoot- ing Mode).

2. Press the M button.

The Shooting menu appears.

3. Press the #$ buttons to switch

4. Select [Image With Sound] and press the O or $ button.

5. Press the !" buttons to select [ON].

6. Press the O or # button.

The setting for shooting with sound is complete.

7. Press the M button.

The Shooting menu disappears and the

cross-hair (shooting mark) appears.

8. Press the shutter release button for shooting.

After shooting, the voice mark appears on the screen to indicate the recording status.

9. Press the shutter release button to stop recording.

•By default, your camera is set to OFF.

•When the shooting mode is set to Multi- Shot (excluding S Multi-Shot and M Multi- Shot), sound recording function is not available.

•When shooting with sound, you cannot use Auto Bracket or White Balance Bracket.

For how to play back sound recorded with a still image, see P.82.

52