Ricoh Caplio RX operation manual 172

6.Double-click the [System] icon.

7.On the [System Properties] screen displayed, click the [Hardware] tab.

8.On the [Hardware] tab page displayed, click the [Device Manager] button.

9.On the [Device Manager] screen displayed, click [+] on the left side of [Other Devices].

10.Check if there is [Caplio RX] below it. If there is, right-click [Caplio RX] to display the menu and select [Update Driver].

11.Windows XP will display the [Hardware Update Wizard] screen.

12.Make sure that [Install the software automatically (Recommended)] is selected, and then click [Next].

13.When the [Completing the Hardware Update Wizard] screen appears, click [Finish]. 14.Click the [x] (Close) button to close the [Device Manager] screen.

15.Click [OK] to close the [System Properties] screen. 16.Click the [x] (Close) button to close the Control Panel. 17.Turn off your camera and computer.

18.Turn your computer back on and reinstall the software from the CD-ROM. *At this time, do not connect your camera.

19.Connect your camera via the USB cable to your computer. When the computer recognizes the camera, the [New Hardware] screen launches and your camera is registered by the com- puter.

Step 2If your computer still does not recognize the camera, follow the steps below.

1.Load the Caplio CD-ROM into your computer.

2.Connect your camera via the USB cable to your computer.

3.Click the [Start] button on the Windows taskbar to display the [Start] menu.

4.On the [Start] menu, click [Control Panel].

5.On the Control Panel displayed, click [Switch to Classic Display]. The display changes its appearance and the [System] icon appears.

6.Double-click the [System] icon.

7.On the [System Properties] screen displayed, click the [Hardware] tab.

8.On the [Hardware] tab page displayed, click the [Device Manager] button.

9.On the [Device Manager] screen displayed, click [+] on the left side of [Imaging Devices].

10.Check whether or not there is an unknown device symbol (!) indicated for [Caplio RX]. If there is, right-click the unknown device symbol to display the menu and select [Driver Update].

11.Windows XP will display the [Hardware Update Wizard] screen.

12.Make sure that [Install the software automatically (Recommended)] is selected, and then click [Next].

13.When the [Completing the Hardware Update Wizard] screen appears, click [Finish]. 14.Click the [x] (Close) button to close the [Device Manager] screen.

15.Click [OK] to close the [System Properties] screen. 16.Click the [x] (Close) button to close the Control Panel.

172