Ricoh Caplio RX operation manual Press the O or # button, White Balance settings are complete

5. Press the O or # button.

White Balance settings are complete.

6. Press the M button.

The Shooting Menu closes and the set- ting value is displayed on the upper left

of the screen.

3

Only except for scene mode, This setting will be used for shooting until you change it.

If you select (One Push)

4. Press !" to select (One Push).

5. Point the camera at a piece of paper or something white under the lighting conditions for your picture.

6. Press the $ button.

White Balance is set.

If the result is not as expected, repeat steps 5 and 6 to change the settings as many times as required.

7. Press the O or # button.

White Balance settings are complete.

8. Press the M button.

The Shooting Menu closes and the set- ting value is displayed on the upper left of the screen.

This setting will be used for shooting until you change it.

In Auto Mode, white balance may not be adjusted correctly for a mostly dark subject. In this case, add something white as the subject.

When shooting with flash in a mode other than Auto, the white balance may not be adjusted correctly.

58