Ricoh Caplio RX For Windows XP, Click Install Software Select a language and then click OK

For Windows XP

In Windows XP, only a user with administra- tive privileges can install the software.

1. Make sure that your camera is not connected to the computer.

If you have already connected your cam- era to the computer and the [Found New Hardware Wizard] screen was displayed, click [Cancel], disconnect the cable between the camera and computer, and then continue installation.

2. Start your computer.

3. Insert the CD-ROM in the CD- ROM drive.

The following screen appears automati- cally on your computer screen.

4. Click [Install Software].

5. Select a language and then click [OK].

After a few moments, the [Welcome to InstallShield Wizard] screen appears.

6. Click [Next] .

After a few moments, the [Choose Desti- nation Location] screen appears.

7. Confirm where you want to install the software and then click [Next].

After a few moments, the [Select Com- ponents] screen appears.

1

8. Confirm the software you want to install and then click [Next].

Thereafter, if you continue the operation by following the messages, the [Finish] screen of the [InstallShield Wizard] will appear.

If a message appears asking you whether you want to restart your com- puter, select [Yes, restart my computer now.] then click [Finish]. The computer will restart.

If the screen from step 3 is not displayed automatically, take the following steps.

Click the [Start] button on the task bar and then select [My Computer] from the start menu.

Double-click the CD-ROM drive icon dis- played in the [My Computer] window.

Double-click the AutoRun file (Auto- run.exe) displayed in the CD-ROM drive window.

119