Ricoh Caplio RX operation manual Monitor Mode

Shooting

Symptom		Cause	Measure	Page
I cannot check shot	The image confirmation time is too short.		Lengthen the image confirmation time.	P.107
images.
Images do not	The power is not on. Or the LCD Monitor is dark.		Turn the power on. Or adjust the brightness of	P.16
appear on the LCD			the LCD Monitor.	P.105
Monitor.
	The AV cable is connected.		Disconnect the AV cable.	P.86
	The screen display status is in [SYNCHRO-		Press the DISP. button and switch display.	P.23
	MONITOR MODE].
	It is set to [Power-Save].		Set [Power-Save] to off.	P.110
Although it is set to	The lens is dirty.		Wipe clean with a soft, dry cloth.	-
Auto Focus, it does
	The subject is not in the center of the shooting		Shoot with Focus Lock.	P.37
not focus.
	range.
	It is a hard-to-focus subject.		Shoot with Focus Lock or Manual Focus.	P.37
				P.67
A picture is blurred.	You moved the camera when pressing the shut-		Hold the camera with your elbows tight on your
	ter release button.		body. Use a tripod.
	When shooting in a dark place (ex. indoor), the		Use the flash.
	shutter speed slows down and pictures become		Raise the ISO sensitivity.
	easily blurred.
The flash does not	The Shooting Mode is set to R(Multi-Shot) or		Switch the Shooting Mode to 5(Still Image).	P.50
fire. Or the flash can-	3(Movie).
not recharge.
	The flash is set to	(Flash Off).	Set to Flash Off with the Fbutton.	P.50
	The White Balance is set to something other		Set the White Balance to Auto mode.	P.56
	than Auto mode.
	Batteries are running low.		If using alkaline batteries, replace with a new	P.11
			set. If using rechargeable batteries, recharge or	P.13
			use the AC Adapter.	P.14
Even though the	The distance to the subject is greater than 2.5		Get closer to your subject and shoot.	P.50
flash fired, the pic-	meters in Telephoto or greater than 3.0 meters in
ture is dark.	Wide-angle.
	The subject is blackish.		Correct exposure. (Exposure correction also	P.54
			changes the light quantity of the flash.)
The image is too	You are too close to the subject.		Set to Flash Off with the Fbutton.	P.50
bright.
	It is over-exposed.		Use exposure compensation. Cancel Exposure	P.54
			Time.
	The brightness of the LCD Monitor is odd.		Adjust the brightness of the LCD Monitor.	P.105
The image is too	The shot was taken in a dark place while set to		Release the Flash Off with the Fbutton.	P.50
dark.	(Flash Off).
	It is under-exposed.		Use exposure compensation. Set to Exposure	P.54
			Time.
	The brightness of the LCD Monitor is odd.		Adjust the brightness of the LCD Monitor.	P.105
The image lacks	The picture was shot in conditions that are hard		Add a white object to the composition. Or use	P.56
natural color.	for Auto White Balance to adjust to.		Auto Balance in a setting other than Flash shoot-
			ing or Auto Mode.

166