Inserting the Date into a Still Image (DATE IMPRINT)

You can stamp the date on the bottom right of your still images. You can choose to display the date in one of two formats, Date (Y/M/D) or Date and Time (Y/M/D/H:M).

If the date and time have not been set, DATE IMPRINT cannot be used. First make the date and time settings.

DATE IMPRINT cannot be used with mov- ies.

For how to set date and time, see P.111.

To enter the date or date and time, follow the steps below.

1. Turn the Mode Dial to 5 (Shoot- ing Mode).

2. Press the M button.

The Shooting menu appears.

3. Press the #$ buttons to switch between displays as required.

4. Press the " button to select [DATE IMPRINT] and then press the O button.

3

5. Press the !" buttons to select the desired setting.

6. Press the O button.

The Date Imprint settings are completed.

7. Press the M button.

The Shooting Menu closes and [DATE]

appears at the left part of the screen.

This setting will be used for shooting until you change it.

75

Page 75
Image 75
Ricoh Caplio RX operation manual Inserting the Date into a Still Image Date Imprint, Date Imprint settings are completed