Ricoh Caplio RX Using the Shooting Menu White Balance, Shooting menu or the Movie menu appears

If you select (One Push)

3. Press !" to select (One Push).‘

4. Point the camera at a piece of paper or something white under the lighting conditions for your picture.

5. Press the $ button.

White Balance is set.

If the result is not as expected, repeat steps 4 and 5 to change the settings as many times as required.

6. Press the O button.

White Balance settings are completed and the symbol appears in the upper left

of the screen.

When shooting with flash in a mode other than Auto, the white balance may not be adjusted correctly.

Using the Shooting Menu (White Balance)

To change the white balance setting using	3
the Shooting Menu, follow the steps below.

1. Turn the Mode Dial to 5 (Shoot- ing Mode) or 3 (Movie Mode).

Alternatively, turn the Mode Dial to

4 (Scene Mode), and select a scene to have the camera ready.

2.Press the M button.

The Shooting menu (or the Movie menu) appears.

3. Press the " button to select [WHITE BALANCE] and then press the O or $ button.

This setting will be used for shooting until you change it.

In Auto Mode, white balance may not be adjusted correctly for a mostly dark subject. In this case, add something white as the subject.

If you select / / / /

4. Press the !" buttons to select a mode.

You can also press the shutter button in this state.

57