Ricoh PJ WX4130 operating instructions Changing the Projector Settings

3.Changing the Projector Settings

•-16 to +16

Sharpness

Adjust the sharpness of the image.

The greater the value, the sharper the image. Default: 0

•-8 to +8

Noise Reduction

Select whether or not to use the function to reduce the Y/Pb/Pr (480i/576i) or video signal noise. This function is available when you select [Y/Pb/Pr] (480i/576i) or [Video] as an input signal. Default: [Off]

•On

•Off

R-level

Adjust the level of red in the image.

The greater the value, the stronger the color red is in the image. Default: 0

•-16 to +16

G-level

Adjust the level of green in the image.

The greater the value, the stronger the color green is in the image.

Default: 0

•-16 to +16

B-level

Adjust the level of blue in the image.

The greater the value, the stronger the color blue is in the image. Default: 0

•-16 to +16

RGB Input Range

Select the RGB input range.

When connecting an AV equipment which outputs a full-range RGB signal by HDMI cable, the image becomes clearer by selecting [Full].

This function is available when you select [HDMI] (RGB signals) as an input signal. Default: [Full]

54