Ricoh PJ WX4130 operating instructions Default Settings Menu

Default Settings Menu

•3

•4

Power Off on No Signal

Select the time from the final operation to automatic power shutdown when there are no input signals.

Default: [Off]

•Off

•5 min.

•10 min.

•20 min.

•30 min.

Power On Method

Select whether or not to use the auto power on function. Default: [Manual]

•Manual

Turn the projector on when the [Power] button is pressed.

•Auto.

Automatically turn on the projector when the power cord is connected. Standby Energy Saving

Select the level of energy savings while on standby.

You can save power by using this function. However, this function affects start-up time. Select a mode according to how you use the projector.

Default: [High]

•High

The energy saving level is high, but start-up time is slower.

•Low

The energy saving level is low, but start-up time is faster. Lamp Power

Select the lamp power level.

Select [Eco] if the image is too bright or when projecting images in a dark room. Default: [Stnd.]

•Eco

•Stnd.

61