1. Preparations for Using the Projector

Loading Batteries into the Remote Control

For safe operation, follow the warnings below regarding the batteries used in the remote control. If you use the batteries incorrectly, it may result in fire or injury due to batteries leaking or exploding.

Do not use batteries other than the ones specified.

Do not mix and use batteries that are different types or that are new and old.

• Correctly insert batteries according to the polarity (/ ).

Do not charge non-rechargeable batteries.

Do not heat or throw the batteries into fire or water.

Do not connect the positive and negative terminals on a battery with a wire.

Remove the batteries from the remote control that are past their suggested use period or that are depleted.

Remove the batteries when they will not be used for extended periods.

Keep the batteries out of the reach of children. Children may swallow or choke on the batteries. If this happens, contact a doctor immediately.

1.Remove the battery cover from the remote control.

CLB015

18

Page 20
Image 20
Ricoh PJ WX4130 Loading Batteries into the Remote Control, Remove the battery cover from the remote control