Installing Options
Memory Unit TypeB 64MB
Important
❒Before touching the Memory Unit, touch something metal to dis- charge any static electricity. Static
2 | electricity can damage the Memo- |
| ry Unit. |
A Check the contents of the box for the following items:
•Memory Unit
•Installation Guide
B Confirm that the followings are true:
•The power switch is turned off.
•The interface cable is un- plugged from the printer.
Note
❒If the Duplex Unit is not at- tached, go to step D.
C If the Duplex Unit is attached, push down the lever on right side (A) and pull out the Duplex Unit until it stops (B).
ZGDX320J |
D Use a coin to remove the two screws.
Note
❒The removed screws are re- quired in step K.
ZGDX280J |
E Pull out the handle of the control- ler board.
ZGDX370J
F Pull the handle and slide the con- troller board out.
ZGDX260J |
18