Configuring the Printer for the Network
A Press {Menu}.
On Line | Menu |
|
Job Reset | Escape |
|
Form Feed | Enter |
|
Power | Error | Data In |
3 |
| ZFDP020N |
|
|
“Menu” appears on the panel dis- play.
B Press {U} or {T} to display “Host Interface” menu.
Menu:
Host Interface
C Press {Enter #}.
On Line | Menu |
|
Job Reset | Escape |
|
Form Feed | Enter |
|
Power | Error | Data In |
ZFDP060N
The following message appears on the panel display.
Host Interface:
I/O Buffer
D Press {U} or {T} to display “Net- work Setup”.
Host Interface:
Network Setup
E Press {Enter #}.
The following message appears on the panel display.
Network Setup:
IP Address
F Select the protocol you want to use.
Note
❒Do not select protocols that are not used on your network.
A Press {U} or {T} to display “Active Protocol”.
Network Setup:
Active Protocol
BPress {Enter #}.
The current setting appears on the panel display.
Active Protocol:
TCP/IP
CPress {Enter #}.
DPress {U} or {T} to select "Ac- tive" or "Not Active", and then press {Enter #}.
ESet other protocols you need to set in the same way.
Note
❒Leave unused protocols "Not Active".
42
