IEEE 802.11b (Wireless LAN) Configuration
F Press {Enter #}. | K Press {On Line}. |
The following message appears on the panel display.
“Ready” appears on the panel dis- play.
Comm. Mode: *Ad hoc
G Press {U} or {T} to select the transmission mode.
H Press {Enter #}.
The display returns to the previous menu in a few seconds.
I Set "Trans. Speed" and "WEP Set- tings" in the same way.
For more information about WEP Settings, see "Using the IEEE 802.11b (Wireless LAN)" in the Network Printing Guide.
J If "Ad hoc" is selected for "Comm. Mode", set the channel to use for transmission.
Note
❒Confirm the network adminis- trator for the channel to use.
A Press {U} or {T} to display "Channel".
IEEE 802.11b:
Channel
BPress {Enter #}.
The channel currently used ap- pears on the panel display.
Ready
L Print a configuration page to con- |
|
firm the settings made. See |
|
"Printing a Configuration Page" | 3 |
in the Printer Reference. |
The settings are now complete. Go to p.51 “Installing the Printer Driv- er and Software”.
-Address
❖Subnet Mask
A number used to mathematically “mask” or hide an IP address on the network by eliminating those parts of the address that are alike for all the machines on the net- work.
❖Gateway Address
A gateway is a connection or inter- change point that connects two networks. A gateway address is for the router or host computer used as a gateway.
Note
❒To get the addresses, contact your network administrator.
Channel:
C Press {U} or {T} to enter the channel.
DPress {Enter #}.
49
