Ricoh AP2610 Connecting the 1394 Interface, Cable to the Printer, Interface Unit, specifications

Installing Options

Connecting the 1394 Interface

Cable to the Printer	-1394 Interface Unit
	specifications
A Attach the 1394 interface cable to	❖ Interface Connector:
the jack on the 1394 Interface	IEEE 1394 (6 pins ⋅ 2)
Unit.

2	Both types of jack are available.	❖ Required cable:
		1394 interface cable (6 pins x 4
		pins, 6 pins x 6 pins)
		Important
		❒ You cannot plug devices togeth-
		er to create loops.
		❒ Do not use a cable more than 4.5
		meters (14.8 feet) long.
		❖ Connectable number of devices in a
	ZGDX550J	bus:

B Connect the other end of the 1394 interface cable to the computer or the other IEEE 1394 node.

Note

❒After installing the last option that you want, print the configuration page to confirm the installation. If the new device is listed in the col- umn of configuration options, then it has been properly installed. For more information about printing the configuration page, see "Print- ing the Configuration Page" in the Printer Reference on the CD-ROM labeled "Operating Instructions".

Maximum 63

❖Allowed cable hops in a bus:

Maximum 16

❖Power supply:

Nonpower supply

Cable Power repeated (IEEE 1394a-2000 compliant)

28