Ricoh Type B, AP2610 When connecting with the network, When connecting with IEEE, Limitation

Installing the PostScript Printer Driver

•Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec- tional support] must be selected and [Enable printer pooling] must not be se- lected on the [port] tab with RPCS printer driver.

❖When connecting with the network

•The printer must be set to bidirectional transmission.

•SmartNetMonitor for Client included on the CD-ROM must be installed, and the TCP/IP protocol must be used.

•Under Windows 95/98/Me, [Enable bidirectional support for this printer] must be selected in [Spool Settings…] on the [Details] tab with RPCS printer driver.

•Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec- tional support] must be selected and [Enable printer pooling] must not be se- lected on the [port] tab with RPCS printer driver.

• Under Windows NT 4.0, specified IP address in the Microsoft TCP/IP	4
print is used.

❖When connecting with IEEE 1394

•The printer must be connected to the IEEE 1394 connector of a computer using the IEEE 1394 interface cable.

•[Activate] is selected in the SCSI print of IEEE 1394 and [Activate] is selected in the Bidi-SCSI print.

•Under Windows 2000/Windows XP and Windows NT 4.0, [Enable bidirec- tional support] must be selected and [Enable printer pooling] must not be se- lected on the [port] tab with RPCS printer driver.

❖When connecting with USB

The printer must be connected to the USB connector of a computer using the USB interface cable.

-Cautions when connecting the USB interface cable and the IEEE 1394 interface cable

Limitation

❒Do not unplug the cable while printing. Do not turn off the printer power while printing or during bidirectional transmission.

63