Ricoh AP2610 IEEE 1394 Setup SCSI print, IP Address1394 192.02k.033.044, SCSI print *Active

Configuring the Printer for the Network

G Assign the IP address to the printer.

Do not overlap the IP address in the same subnet or the same IP ad- dress in the network setting.

Note

❒To get the IP address for the printer, contact your network administrator.

A Press {U} or {T} until the fol-

3 lowing message appears.

IEEE 1394 Setup:

IP Address1394

BPress {Enter #}.

The current IP address appears on the panel display.

IP Address1394: 000.000.000.000

C Press {U} or {T} to enter the leftmost entry field of the IP address.

IP Address1394: 192.022.033.044

DPress {Enter #}.

The pointer (k) moves to the next entry field automatically.

E Repeat steps C and D to enter the IP address.

IP Address1394: 192.168.000.011

Check if the pointer (k) is at the rightmost position, and press {Enter #} to register the IP ad- dress you selected.

IEEE 1394 Setup:

IP Address1394

H Set "Subnet Mask1394" in the same way.

I Set "SCSI print" and "Bidi-SCSI print" if necessary.

Note

❒The default setting is "Active".

J Press {U} or {T} to display "SCSI print".

IEEE 1394 Setup:

SCSI print

K Press {Enter #}.

The following message appears on the panel display.

IP Address1394: 192.02k.033.044

Note

❒The value moves by 10 if {U} or {T} is kept pressed.

❒You can return the pointer (k) to the previous (left) entry field by pressing {Escape}.

❒If you press {Escape} when the pointer (k) is on the left- most position, the selected IP address is reset.

SCSI print: *Active

L Press {U} or {T} to select either "Active" or "Not Active", and then press {Enter #}.

Set " Bidi-SCSI print " in the same way.

46