Configuring the Printer for the Network
IEEE 802.11b (Wireless LAN) Configuration
Configure the printer for using the wireless LAN. The following table shows the control panel settings and their default values. These items are included in the "Host Interface" menu.
Setting Name | Value |
3 |
| Comm. Mode | Ad hoc | |
|
| |||
|
|
|
|
|
|
| Channel | • | Inch version |
|
|
|
| |
|
|
|
|
|
|
|
| • | Metric version |
|
|
|
| |
|
|
|
| |
|
| Trans. Speed | Auto | |
|
|
|
| |
|
| WEP Settings | Not Active | |
In order to use the wireless LAN, se- lect "IEEE 802.11b" for "LAN Type" in "Network Setup" of the Host Interface menu, and then set "IP Address", "Subnet Mask", "Gateway Address", "Network Boot", "Frame Type (NW)" and "Active Protocol" in the "Net- work Setup". For more information about setting the items in the "Net- work Setup", see p.41 “Ethernet Con- figuration”.
A Press {Menu}.
On Line | Menu |
|
Job Reset | Escape |
|
Form Feed | Enter |
|
Power | Error | Data In |
ZFDP020N
“Menu” appears on the panel dis- play.
B Press {U} or {T} to display “Host Interface” menu.
Menu:
Host Interface
C Press {Enter #}.
On Line | Menu |
|
Job Reset | Escape |
|
Form Feed | Enter |
|
Power | Error | Data In |
ZFDP060N
The following message appears on the panel display.
Host Interface:
I/O Buffer
D Press {U} or {T} to display "IEEE 802.11b".
Host Interface:
IEEE 802.11b
E Press {Enter #}.
Be sure that "Comm. Mode" ap- pears on the panel display.
IEEE 802.11b:
Comm. Mode
48
