Assembly (continued)
5.Set large tool rest in tool rest holder and install lever assembly as shown.
6.Slide tailstock assembly onto the tube and install tailstock ram spindle lock lever. Be sure that the stud nut engages the keyed way of the spindle.
7.On the backside of the tailstock, assemble the locking devices as shown.
NOTE: Make sure to insert brass shoe lock before installing lever assembly.
Tool Rest
Lever
Assembly
Tailstock Ram
Spindle 
Lever
Assembly
Keyed Way
Tailstock
Assembly
Headstock End
Tailstock
Assembly
Lever
Assembly
Brass Shoe
Lock
Headstock End
18
