RIDGID WL1200LS1 manual Wiring Diagram, Maintenance, Recommended Accessories

Wiring Diagram

White		White
Motor
Outlet	Switch	Insulated
Green		Cap Flag
		Terminal
		Black
Black		Green
		Power
		Cord

Maintenance

Maintenance

WARNING: For your own safety, turn switch "OFF" and remove plug from power source outlet before maintaining or lubricating your lathe.

Apply a coat of automobile-type wax to the lathe bed to help the tool rest and tail- stock move freely.

Have power cord replaced if it becomes worn or frayed.

Recommended Accessories

Item	Description
Replacement Safety Keys	........... AC1000
Drill Chuck	AC2020
Work Arbor	AC8010
4" Faceplate	AC8040
Bowl Turning Tool Rest	AC8070
Her-U-Lift (required purchase of
AC9951 - Wood Lathe Extensions
for use on the WL1200)	AC9950

Lubrication

Periodically lubricate the ram in the tailstock with No. 20 or No. 30 engine oil.

Motor Maintenance And Lubrication

1.The bearings, in both end shields of the motor, have been lubricated at the fac- tory with correct lubricant. No other part of the motor requires lubrication.

2.If disassembly of the motor is neces- sary, it should be returned to your near- est RIDGID Service Center retail store in order to prevent voiding the guaran- tee.

NOTE: The speed of this motor cannot be regulated or changed.

47